K8055 proportional output with XSim

[scottlolo89]

speed da1

bonjour je suis francais j ai realiser un motion 2 dof ac electrique avec variateur de freqence voir
http://flightmotion89.canalblog.com

sortie k8055 digital pour left et right

marche avant right digital ouptut 1 connecter sur s1 entree multifonction ok
marche arrierre left digital ouptut 2 connecter sur s2 entree multifonction ok
gnd velleman sur sc commun d entree de sequence ok

sorti k 8055 analogique pour speed analogue output 1

5 voltes sur FR entree de reference de freqence analogique ok
0 voltes sur FC gnd de reference de freqence ok

ma question
its possible use x-sim2 soft in profiler for variation speed in 0 a 5 voltes in my variteur de freqence for the speed analogue+digital output let and right ?

the variateur de freqence is not possible use the pwm speed and direction.

[egoexpress]

*moved into new topic*

[scottlolo89]

my simulator

fonction 2 motoreducteur 15 rpm 550 watts
2 variateur freqency omron j7 input 220 voltes ouptut 380 voltes
1 k8055
1 vm 129 relais
my video roller coaster fonctionnement



my simulator is good perfomence

[tronicgr]

Hi,

You could use my circuit to convert the 0-5v of k8055 to 0-10v ...



(more here: post14488.html#p14488 )

But how are you going to implement positioning? The delay of reading k8055 values from potentiometers back to x-sim could be dangerous to use and in case the computer program crashes the motors will keep accelerating!!!!!!!!!!!!!


I do the proportional positioning inside my AMC microcontroller with cycles of 1.5ms !!!! And the positioning control is fully autonomous from the computer software that delivers only the end positions. So in case of computer crash, the AMC controller will keep the motors positioned to the last given position safely!!!



BTW, your frequency drives has 0-10v input. Can you answer if these are correct:
If you feed it with 0V will rotate to one direction (say left)?
If you feed it with 5V will stop the motor?
If you feed it with 10V will rotate to the other direction (say right)??


Best Regards, Thanos

[egoexpress]

The delay of reading k8055 values from potentiometers back to x-sim

Afaik Sirnoname has written as improved K8055 plugin, that eliminates the pot reading lag
You simply have to uninstall the K8055 manufactuer drivers, and use XSim.

[scottlolo89]

speed

i am not use the 0 a 10 voltes
i am use to 0 a 5 voltes the variateur is reglable in interne the freqence
reglage normali the variateur is 0 a 200 % is very dangerous
i have bloquer the variateur a 20 % the capacitei in 5 volte maxi is security is good mouvement programation interne variateur programme n46

my reglage speed is to 0 a 5 voltes de 0 % speed a 20 % suffit amplement for my configuration is good for my simulator the reglage
its ok

my probleme is reglage synotik ouptut

look attachement

[scottlolo89]

reglage profiler

i want the reglage profiler
electrovane output digital
et air flow analogue speed
voir attachement its simply probleme reglage in profiler

[scottlolo89]

the variateur to freqence

no fonction pwm ,the pwm for motor dc /moteur brushess

pwm no moteur ac use variateur de freqence moteur asyncron

the variateur to use 0 A 10 voltes speed freqence 0 a 200 % entree analogique no direction just speed

the direction is controler enter digital s1 right exemple s2 left exemple

the motor security break saft no electricite
the motor securit interupteur end course
its maximum security

no probleme pc crash
the reglage maxi speed in variateur is 20 % no dangerouse pc crash the motors its brake end course interupteur

the 0 volte = 0% speed the 5 voltes = 100 % the 10 voltes = 200 %

in my configurations the demo velleman da1 the 0 voltes = 0% the 5 voltes = 20%

thanks my anglais is not terrible

[egoexpress]

btw, you can make screenshots easily with the print key on your keyboard, and then simply paste them with right mouse click into picture edit program. MS Paint or irfanview for example.

regards

[scottlolo89]

is possible inverter direction 0 a 10 voltes omron v7

but no speed