Motion Simulator community for haptic flight and racing simulation. Get in and start your project: Register here

[Nima]

hi,
good idea slickr.
brightonuk:i have on my dom now a revolution over a dualheat digital from matrox (is work with a tribble digital to) from 3840x1080 (2x 1920x1080) but say in the nthusim soft only 1 projektor and than make the convergence with
nthusim soft new and all is better.

[binky9]

http://www.goosystemsglobal.com/index2237f.html

Very Helpfull people.

And even for a 60" dome you only need 500ml and you will have with some to spare.
Just take your time and use a good sprayer with an inline filter (you only get one shot)
SLOW and LIGHT it drys very quickly, try it then add another layer if need be.
Just like painting a car you have to get an even coat

Brightonuk,

I am a couple of years behind on this (just found the forum). What has been your experience with your dome?

Can you give me some detailed info and pics of what your setup looks like? I'm about to start looking seriously into a dome, myself.

Any help much appreciated,

Binky9

[abs]

hello

i dont know if we can still post here/ i ll give a try

can you give details on

where to apply the goo paint outside or inside
the projetctor needs to go in front of the driver and send a reversed image ? what is the distance (rigth up or in a diagonal line)?
do we need a triplehead2go? how do you obtain the resolution

i intend to go with 20 inches high? is this OK
what is the size of the frex canopy

thank you guys for any feedback

[Nima]

Hi
I have the paint outside.i have a 60 inch Dom and the Projektor is over my Head
Than to a mirror and than on the dom .but now i use only One Projektor.