iracing bassshaker profil

[Nima]

hi,
i have make a new bassshaker profil for iracing.ihave make it with the star mazda.
but you can use it with all cars.with shift effect engine rounds effekt curbs,drift,brake and bumbs effects.i love the feeling with drift on bassshakes.
comments wantet.

[Nima]

hi,
i have work any houers again for a good profil and i find any new effects
and the old effects i have make better.you mast have in the sender on axis z the position from your brake is in profiler number 43 you must have it from
0 to 117 not from -117 to 117.than i have a very realistic feeling on brake
and on still tires on brake.very nice feeling on drift,you can feel were are the tires rubber on curve.nice shift feeling very nice shift down on brake.
a littel curbs and bumps feeling.but i work in the next time again imean i can
make any thinks better but in the moment i very happy with the result.
the new profil is in the first posting the name is iracing bassshaker 3

[lucasvlegacy]

Hello everyone.
I have connected a bass shaker to my soundcard but profiler
does not see it.
What are the steps to recognize the soundcard as output
Thanks for your help

[Nima]

hi you must open the bassshaker plugin in interface settings.
than set your soundcard in the plugin. than you mast restart the profiler
and than the profiler find your soundcard.

[lucasvlegacy]

Many thanks for your quick response, sorry to my knowledge very low so if my questions seem silly and because of my incompetence.
My aura bass shaker is connected to an ampli connected to the internal sound card of my pc.
When i open the profiler i can't see no output or interface and i dont know how to configure a port
for recognize the soundcard as an output
Thank for your patience

[Nima]

hi,you can not use the same soundcard were are make the playsound.you mast have a second soundcard or a second pc.
sirnoname have wride:
Connect your bass shaker to your soundcard and control its frequency and volume with the ingame RPM or Speed value. (or whatever you like)
Attached you find a sample setup for the test plugin to get a feeling for it.
For setup you have to open the plugin dialog and select a soundcard where the frequency has to be sent to.
Fill the dialog with your wished minimum and maximum frequency. (sine output!)
Press the HW rescan button, insure the plugin output is listed in the interface setup of the profiler.

[lucasvlegacy]

Hi i'm here again
In my pc there are no room for another sound card so i have buy a really cheap USB sound card key
After connected everythings working fine but when i try to charge the profile on profiler it doesent
recognize the sound card on usb so i can't find no output for bass shaker volume or frequency.
It 's x-sim that doesent work with USB sound card or some other thing that i dont understand.
Sorry again for my silly question but i have 6 bass shaker and i wish to drive 1 at least with x-sim

Thank in advance for your help

[bvillersjr]

Is your sound card properly registering with Windows, and is is Direct Sound? If you go to Control Panel-->Sound and see if your new sound card is listed.

[lucasvlegacy]

Yes is listed as speaker " USB AUDIO " and if i connect another one is listed as " USB AUDIO 2"
I use win7
By the way if i connect some real speaker or bass shaker on it and configure it as predefined i can hear
music or vibration so it works for windows but i dont know how to make it " visible " for profiler

[Raceray]

Try to start x-sim with admin priviliges