|
Supported control interfaces for IO-Output |
|
|
There are two methods of simulator control with X-Sim:
- active control, where an target value will be compared with an current value like an potentiometer
- passive control, where only the target values will be transfered to a hardware motion control
To be able to drive motors proportionally with 10bit speed resolution, Tronicgr' AMC 1.5 controller is recommended currently.
Following interfaces are dedicated for hydraulic and pneumatic valves. 3 speeds are possible.
Softmotion of X-Sim is only available in active controls or has to be controled by an extra hardware motion control. Just the old Rock'n'Ride interface is an passive control with 7 possitions/axis.
|
The original old Rock’n’Ride interface, to control via serial rs232 interface.
|
The selfmade USB interface with support for Softmotion.
|
|
The experiemantal USB Interface K8055D from Velleman / Conrad Elektronik.
|
Regular 8- port relais cards at the LPT Port or your own build interfaces
|
|
The serial relaiscard interface from Conrad Elektronik.
|
Universal Outputs at the serial bus (COM-port) for SPS and other controls
|
|
 |
|
Atention:
Modification should be made only by technicians and experts.
The author of this site will not give any warranty and will not be responsible for any damages.
|
|
|
Last Updated ( Monday, 31 March 2008 )
|
Hardware 
